Van Compass Opti-Rate Striker 2-Inch Lift Kit for 2015–2022 Mercedes-Benz Sprinter 4×4 2500 SRW

Description

Part#
Sprinter 2015-2018: VCMP-7035-OPTI
Sprinter 2019-2022: VCMP-7057-OPTI

Need a lift kit for your 2015-2022 2500 Mercedes Sprinter 4×4 van? With the Van Compass 2015-2022 Mercedes Sprinter 4X4 2500 – Opti-Rate Striker 2″ Lift Kit (Single Rear Wheel), your Mercedes Sprinter 4×4 van will take you farther on your next overland adventure than you have ever gone before. The Striker 4×4 lift kit provides clearance needed to fit larger tires and push deeper into back country landscapes with confidence in the increased capability. Through years of careful development and design, Van Compass created a system that lifts the van with as few compromises to the original design parameters.

A combination of machined and welded spacers lowers the front subframe, keeping the CVs, tie rods, and control arms cycling within the original Mercedes-set geometry range.

At the rear, the Opti-Rate rear leaf spring pack is paired with a 2″ lift block, longer sway bar links, shock relocation brackets, and bump stop spacers to ensure nothing binds, over-extends, or over-compresses during axle articulation.

The innovative Opti-Rate springs allow you to fine-tune both the spring rate and ride height, making this kit ideal for heavy vans in the 9,000–10,000 lb range and beyond. It’s perfect for upgraded Storytellers, Revels, 170 EXT vans with full interior build-outs, or vans carrying extra weight behind the rear axle like door carriers, hitch racks, and trailers.

With the right wheel offset and fender trimming, you can even fit a 35 x 12.50 tire for a huge boost in traction and ground clearance.

Lift your van and hit the trail with confidence on your next overland adventure.

Key Features

• Fits 2015-2022 Mercedes Sprinter 4×4 2500 vans only(select in menu)
• Front 2″ strut spacers
• Front 2″ subframe drop spacers
• Engine and transmission mount 2″ lift spacers
• CNC Machined 2″ steering shaft extension
• Low pressure power steering hose extension
• Front brake line relocation brackets
• Opti-Rate Rear leaf spring pack
• 2″ rear lift block
• Extended rear sway bar links
• Rear lower shock relocation brackets
• Rear bump stop drop brackets
• Wind assist or headlight leveling sensor bracket
• All necessary hardware and detailed instructions

Fitment Guide

MODEL: SPRINTER 2500

YEAR: 2015-2022 (Select from drop down)

DRIVE TYPE: 4X4

>>COMPLETE WHEEL AND TIRE FITMENT GUIDE<<

>>DON’T KNOW YOUR VANS WEIGHT? USE THE CAT SCALE LOCATOR<<

NOTE: With this lift kit, tires up to 35″ diameter and 12.5″ width can fit. Trimming of the fender liner and mud flap is required.
Recommended Wheel Size: 17″ x 8.5″, +45mm offset

Documents

• 2015-2018 NCV3 4×4 Striker 2″ Front Kit Installation Instructions
• 2019-2022 VS30 4×4 Striker 2″ Front Kit Installation Instructions
• Striker 2″ Rear Kit with Opti-Rate Springs Installation Instructions

 

 

Explore more from our collection.